Printable Ring Sizer

A printable ring sizer works when it prints at exactly 100%: print the free PDF for your paper at Actual size, check that the bar measures 100 mm, then place a ring that fits over the circles or wrap the strip around your finger. If the print shrinks, every size reads too large, so the 100 mm check matters more than anything else on the sheet.

By Eric Jordan · PDF files checked 16 November 2026 · Sizes from our sizing engine · How we calculate

A4: UK, Europe, Asia, Australia · US Letter: US, Canada, Mexico

What is on the printable ring size chart

  • Calibration bar · exactly 100 mm, with 10 mm ticks
  • Actual-size ring size chart · 21 circles for US sizes 3 to 13 in half sizes, each labelled with its inside diameter in mm
  • Strip sizer · cut out, wrap your finger, read the size at the slit
  • Bank card outline · 85.60 × 53.98 mm, a second check if you have no ruler

Do printable ring sizers work?

Yes, if the sheet prints at the right size. The file itself is not the weak point: the printer is. We checked our own PDFs on 16 November 2026 by rendering both sheets at 600 dots per inch and measuring them:

What we measuredA4 PDFUS Letter PDF
Calibration bar100 mm (100.16 mm including the end tick lines)100 mm (100.16 mm including the end tick lines)
21 sizing circles, US 3 to 13Every circle within 0.07 mm of its stated diameterEvery circle within 0.08 mm of its stated diameter

A quarter US size is about 0.2 mm in diameter, so the files are accurate to well under a quarter size. What can go wrong is the print: a printer or print dialog that shrinks the page shrinks every circle and every mark on the strip with it.

What a shrunken print does to your size

If the sheet prints smaller than 100%, each circle is smaller than its label, so a ring will match a circle that is labelled too large. The same happens with the strip. This is the effect on the circle labelled US 7, which should be 17.32 mm across:

Print scaleCircle labelled US 7 measuresThat is reallyYour result
100%17.32 mmUS 7Correct
99% (bar reads 99 mm)17.15 mmAbout US 6¾About a quarter size too large
97% (bar reads 97 mm)16.80 mmAbout US 6⅓More than half a size too large
95% (bar reads 95 mm)16.46 mmAbout US 6About a full size too large

Figures use the US scale formula in how we calculate. If your bar reads less than 99 mm, reprint before you measure.

Three checks for an accurate print

  1. Print at Actual size. In the print dialog choose Actual size or 100%. Turn off Fit to page and Shrink to fit.
  2. Measure the 100 mm bar. Lay a ruler along it. If it is off by more than 1 mm, change the print setting and print again.
  3. Check with a bank card. No ruler? Any standard bank card should fit the printed outline exactly.
Printing fromSetting to choose
Adobe Acrobat or ReaderPage Sizing: Actual size
Chrome or EdgeMore settings › Scale: Default or Custom 100; untick Fit to page if shown
Mac PreviewScale: 100%; untick Scale to fit
Phone or tabletMany mobile print dialogs scale without asking. Print from a computer if you can, and always check the bar.

Use the PDF that matches the paper in your printer. Printing the A4 file on US Letter paper, or the other way round, can make the print dialog scale the page.

Circles or strip: which to use

Circles (ring that fits)Strip sizer (your finger)
MeasuresThe inside diameter of a ringThe circumference of your finger
Best whenYou have a ring that fits the same fingerYou have no ring, or the ring is for a new finger
Watch out forThick bands hiding the line; match the inside edgePulling too tight; check it passes the knuckle

How to use the circles

  1. Place a ring that fits the same finger flat on the circles.
  2. Find the circle whose line sits just inside the ring’s inner edge.
  3. If the ring falls between two circles, it is between those sizes: the circles go up in half sizes.
  4. Check the size in the ring size chart in mm using the diameter printed under the circle.

How to use the ring sizer strip

  1. Cut along the outline and cut the slit at the marked end.
  2. Wrap the strip around the base of your finger, numbers facing out, and feed the pointed end through the slit.
  3. Pull until it is snug but not tight, and check it still passes over your knuckle.
  4. Read the size at the slit. If you sit between two marks, choose the larger for a wide band.

If the print looks wrong

ProblemFix
Bar is shorter than 100 mmThe page was scaled down. Choose Actual size or 100% and turn off Fit to page.
Edges are cut offYou may have the wrong paper size. Download the PDF that matches your paper.
Printing from a phonePhone print dialogs often scale silently. Check the bar every time.
No printerUse a strip of paper and a ruler instead: see the paper strip method, or measure a ring on your screen with the online ring sizer.

Once you have a measurement, look it up in the mm and cm chart or enter it in the calculator. Prefer another method? See all six ways to measure ring size at home.

Questions

Do printable ring sizers work?

Yes, if the sheet prints at 100%. Measure the 100 mm bar first: a print that shrinks to 97% makes your size read more than half a size too large.

Is a printable ring sizer accurate?

Our PDFs measure within 0.08 mm of their stated sizes, well under a quarter size. The accuracy of your result depends on printing at Actual size and checking the bar.

Can I print a ring sizer at home for free?

Yes. Download the free A4 or US Letter PDF, print it at Actual size or 100%, and check the 100 mm bar with a ruler or the bank-card outline.

How do I know the ring size chart printed at actual size?

Measure the 100 mm bar. If it reads 99 to 101 mm the sheet is usable; if not, reprint at 100% with Fit to page off. The bank-card outline is a second check.

Which PDF should I choose?

Choose the one that matches the paper in your printer: A4 in most countries, US Letter in the US, Canada and Mexico.

Can I print a ring sizer from my phone?

You can, but many phone print dialogs scale the page without asking. Print from a computer if possible, and always check the 100 mm bar.

Can I use a printable ring sizer for a smart ring?

Smart ring brands often use their own sizes. Use their sizing kit when one is offered, and use this sheet only to estimate. See smart ring sizing.