This sizer needs JavaScript. Use the printable ring sizer instead.
Step 1 of 2: calibrate your screen
Match the outline to a real card
Any standard credit, debit or ID card works: they are all 85.60 × 53.98 mm. Keep your browser zoom at 100%.
Place your ring on the circle
Lay a ring that fits flat on the screen and adjust until the circle's line sits just inside the ring's inner edge.
Using your saved screen calibration.
Jump to:
Your ring size
—
- UK / Australia
- ISO / EU
- Japan
Check the result with a second method before buying a ring you cannot resize. See every size in mm.
How the online ring sizer works
- Calibrate. Every screen shows millimetres at a different size, so the sizer first asks you to match an outline to a real bank card. All standard credit, debit and ID cards are 85.60 × 53.98 mm (the ISO/IEC 7810 ID-1 size). No card? Use a ruler and match a 50 mm bar instead.
- Place your ring. Lay a ring that fits the right finger flat on the screen.
- Adjust the circle until its line sits just inside the ring’s inner edge. The size updates as you go, in quarter sizes.
- Read your size in US, UK/Australian letters, ISO/EU and Japanese sizes, with the exact millimetres.
The calibration is saved on your device, so you only do it once per screen. If you change the browser zoom or switch devices, calibrate again.
How accurate is an on-screen ring sizer?
About as accurate as your calibration. Ring sizes are only about 0.2 mm apart per quarter size, so a small mismatch with the card changes the result. These figures use the US scale in how we calculate:
| If the card outline is off by… | A US 7 ring reads about… |
|---|---|
| 0.5 mm on the long edge (landscape, most computers) | About an eighth of a size out |
| 1 mm on the long edge | A quarter size out |
| 1 mm on the short edge (portrait, most phones) | Almost half a size out |
- Line the card up carefully at the corners and check both edges, not just one.
- Keep the browser zoom at 100% and the ring flat; looking at an angle makes the circle look smaller.
- Thick or wide rings can hide the line. Look straight down and match the inside edge, not the metal.
- For an expensive ring, or one that cannot be resized, confirm with a second method or a jeweller.
Online sizer, printable sizer or a ruler?
| Method | Best for | Main risk |
|---|---|---|
| Online ring sizer | A ring that fits, a card and any screen | A loose calibration |
| Printable ring sizer | Measuring your finger without a ring | A print that shrinks; check the 100 mm bar |
| Ruler and a ring | Quick check with no device | Half a millimetre is hard to read |
| Paper strip | No ring and no printer | Wrapping too loose or too tight |
This sizer measures a ring, not your finger. If you do not have a ring that fits, use the printable strip sizer or one of the other ways to measure ring size at home.
Phone or computer?
Both work. On a computer the card usually fits sideways, so you calibrate against its long edge, which is a little more precise. On a phone the outline is shown upright so a whole card fits on the screen. A tablet works like a computer. Whichever you use, calibrate on that device: a calibration from one screen does not carry over to another.
What to do with your size
- See every size and its measurements in the ring size chart or the chart in mm and cm.
- Shopping from a UK or Australian store? Use the UK and Australian letter chart, or the ring size converter for other systems.
- Between two sizes? See how a ring should fit before you choose.
- Buying a smart ring? Brands use their own sizes; see smart ring sizing.