Men’s Ring Size Chart: US, UK & EU Sizes in mm and Inches

Men's ring sizes use the same scale as women's; men simply wear larger sizes, most often around US 9 to 10. A US 10 men's ring is 19.76 mm across the inside and 62.1 mm around (UK T½, EU 62). The chart below covers US 7 to 16 with UK, EU and Japanese equivalents in millimetres and inches. If you plan to buy a wide band or a comfort-fit band, read the fit notes underneath, because both can change the size you need.

By Eric Jordan · Every value calculated by our sizing engine · Last updated 6 November 2026 · How we calculate

Men’s ring size chart

Find your inside diameter (across the ring) or inside circumference (around your finger) and read across. US sizes 9 and 10, the most common men’s sizes, are in bold.

US / CanadaUK / AustraliaISO / EUJapanDiameter (mm)Diameter (in)Circumference (mm)Circumference (in)
7N½54.41417.320.68254.422.14
7½O½55.71517.730.69855.702.19
8P½57.01618.140.71456.972.24
8½Q½58.31818.540.73058.252.29
9R½59.51918.950.74659.532.34
9½S½60.82019.350.76260.802.39
10T½62.12119.760.77862.082.44
10½U½63.42320.170.79463.362.49
11V½64.62420.570.81064.642.54
11½W½65.92520.980.82665.912.59
12Y67.22621.390.84267.192.65
12½Z68.52721.790.85868.472.70
13Z+169.72922.200.87469.742.75
13½Z+271.03022.610.89071.022.80
14Z+372.3–23.010.90672.302.85
14½Z+473.6–23.420.92273.572.90
15–74.8–23.830.93874.852.95
15½–76.1–24.230.95476.133.00
16–77.4–24.640.97077.403.05

UK letters stop at Z+4 and Japanese sizes at 30 on our scale, so larger sizes show a dash. For quarter sizes and sizes below 7, use the full ring size chart; for letters, see the UK and Australian chart.

How to measure a man’s ring size

  1. Use a ring that fits. Measure the inside diameter of a ring he already wears on the same finger, and find it in the chart. This is the most reliable home method.
  2. Or measure the finger. Wrap a thin strip of paper or a printable ring sizer around the base of the finger, mark where it overlaps, and measure the length in millimetres. That is the circumference.
  3. Check the knuckle. Men’s knuckles are often noticeably wider than the base of the finger. The ring has to slide over the knuckle, so measure both and use the larger figure, or a size between the two.
  4. Measure at the end of the day. Fingers are larger in the evening, in warm weather and after exercise. Measure twice, on different days if you can.

Enter the measurement in the ring size calculator to get every size at once. See how to measure your ring size for all four methods, ranked by accuracy.

Band width changes the size you need

Men’s bands are often 6 to 8 mm wide or more. A wider band covers more of the finger, so it feels tighter than a thin ring of the same size. Most people measure with a thin ring or a narrow strip, so the size can come out too small for a wide band.

Band widthWhat to expectWhat to do
Up to about 4 mmFits like a measured sizeOrder the size you measured
About 5 to 7 mmCan feel slightly tighterTry a sizer of the same width, or consider a quarter size up
8 mm and widerUsually feels noticeably tighterMany jewellers suggest about a half size up for a standard-fit band measured at home

Advice varies between jewellers, and Whiteflash notes that narrow and wide sizers can disagree by more than a size on the same finger. The safest approach is to be measured, or to try on a sizer, in the width you plan to buy.

Comfort fit vs standard fit

A standard-fit band is flat on the inside. A comfort-fit band is rounded on the inside, so it slides over the knuckle more easily and feels less tight once on. Many men’s wedding bands are comfort fit.

  • Some jewellers advise ordering a comfort-fit band about a quarter to a half size smaller than your standard measurement; Robinson’s Jewelers suggests half a size.
  • Others advise against sizing down, especially for wide bands, and Whiteflash describes the half-size rule as a rule of thumb rather than a standard.
  • If you were measured with comfort-fit sizers, order that size. If you measured at home with paper or a thin ring, ask the seller how their comfort-fit sizes run before ordering.

Get it right first: many men’s rings cannot be resized

Tungsten, ceramic and titanium are popular for men’s rings, but they are very hard to resize and often have to be exchanged instead. Gold, silver and platinum can usually be resized by one or two sizes. Check the seller’s exchange policy before ordering a ring in an alternative metal. See the ring resizing guide for costs and options.

Which finger?

  • Wedding bands are usually worn on the ring finger of the left hand in the US and UK, and on the right hand in some countries, including Germany and Russia. Measure the finger and hand the ring will go on.
  • Signet and pinky rings sit on the little finger, which is much smaller than the ring finger. Measure it separately.
  • Your dominant hand is often slightly larger, so a size from one hand may not fit the other.

Buying a ring for a man as a gift

Guessing is risky: men’s sizes spread more widely than women’s, and wide or alternative-metal bands are hard to change. Borrow a ring he wears on the right finger and measure it, ask a friend or family member, or choose a seller that offers free exchanges. The average ring size for men is about US 9, but most men are not exactly that size.

Questions

What is the most common ring size for men?

US 9 to 10. Jewellers report US 9 as the most common men's size, with most men between US 8 and 10. A US 9 is 59.5 mm around the inside; a US 10 is 62.1 mm.

Are men's and women's ring sizes the same?

Yes. The same scale is used for everyone: a US 10 is 19.76 mm across the inside whether the ring is sold as a men's or women's ring. Men just tend to wear larger sizes.

What size is 20 mm in men's ring size?

A 20 mm inside diameter is between US 10 (19.76 mm) and US 10½ (20.17 mm), about a US 10¼. Enter the exact measurement in the ring size calculator for the nearest quarter size.

Should a men's wide band be a bigger size?

Often, yes. Bands 8 mm and wider usually feel tighter than a thin ring of the same size, and many jewellers suggest about a half size up for a standard-fit band measured at home. Trying a sizer of the same width is the most reliable check.

Do I need a smaller size for a comfort-fit ring?

Possibly. Some jewellers suggest a quarter to a half size smaller, but others disagree, especially for wide bands. If you were measured with comfort-fit sizers, order that size.

What is the largest men's ring size?

There is no fixed maximum: size ranges vary by seller, and some make larger sizes to order, so check before buying. Our chart goes up to US 16, which is 24.64 mm across the inside and 77.4 mm around.

How should a men's ring fit?

It should slide over the knuckle with a little resistance and sit snugly at the base of the finger without spinning freely. It should not leave a deep mark or feel tight by the end of the day.