How much does it cost to resize a ring?
Prices depend on the metal, the band width, the number of stones and which way the ring is going. These are published starting prices from three jewellers, checked on 5 November 2026:
| Jeweller | Where | Smaller | Larger |
|---|---|---|---|
| Siebke Hoyt | Iowa, US (USD, “starting at”) | Silver $39 · 14K gold $59 · 14K white gold $111 · Platinum $68 | Silver $50 · 14K gold $95 · 14K white gold $147 · Platinum $124 |
| Quick Jewelry Repairs | Online, US (USD, “from”) | From $60 | From $70; sizing beads or bar from $40 |
| FTJCo | Toronto, Canada (CAD, thin band, 0–4 stones) | Silver $45 · 14K $125 · 18K $135 · Platinum $170 | Silver $60 · 14K $180 · 18K $210 · Platinum $250 for one size; each extra size $8 (silver) to $100 (platinum) |
General guides give wider ranges: The Knot puts the average at $20 to $200, and Blue Nile says resizing starts around $20 and can reach several hundred dollars. The price lists show a clear pattern:
- Larger costs more than smaller. Sizing up needs new metal; sizing down removes it, and some jewellers credit the removed metal.
- Platinum usually costs more than yellow gold, and gold more than silver. Platinum needs higher heat and more skill to work.
- White gold often costs extra because it is usually re-plated with rhodium after the work.
- Wide bands and stones add cost. Stones near the join may need protecting, loosening or resetting, and some jewellers charge for each extra size.
Many retailers resize rings bought from them free, often within the first year. Check before paying a local jeweller.
Is it cheaper to resize a ring up or down?
Down. In every price list we checked, making a ring smaller cost less than making it larger, because sizing up means adding new metal. Here is the gap in the same jewellers’ starting prices for one size:
| Jeweller and metal | Smaller | Larger | Difference |
|---|---|---|---|
| Siebke Hoyt, sterling silver (USD) | $39 | $50 | +$11 |
| Siebke Hoyt, 14K gold (USD) | $59 | $95 | +$36 |
| Siebke Hoyt, platinum (USD) | $68 | $124 | +$56 |
| Quick Jewelry Repairs (USD, from) | $60 | $70 | +$10 |
| FTJCo, 14K gold (CAD, thin band) | $125 | $180 | +$55 |
| FTJCo, platinum (CAD, thin band) | $170 | $250 | +$80 |
Sources: Siebke Hoyt, Quick Jewelry Repairs and FTJCo published starting prices, checked 5 November 2026. Your jeweller’s price will depend on the ring.
How many sizes can a ring be resized?
Usually one to two sizes up or down. The Knot gives one to two sizes as typical; going further stretches or thins the band and puts stones under strain. Rose gold is more fragile, and The Knot’s expert advises against changing it by more than a full size. For a bigger change, a jeweller may replace part of the band (the shank) or suggest remaking the ring.
Here is how much the inside of the ring changes for each step:
| Change | Inside diameter | Inside circumference |
|---|---|---|
| 1 US size | 0.81 mm | 2.55 mm |
| ½ US size | 0.41 mm | 1.28 mm |
| 1 UK / Australian letter | 0.40 mm | 1.25 mm |
| 1 ISO / EU size | 0.32 mm | 1.00 mm |
So going up two US sizes adds about 5.1 mm of metal to the band. If you know your size in letters, see the UK and Australian chart.
How a jeweller resizes a ring
- Making it smaller: the jeweller cuts out a small piece of the band, joins the ends, solders them and polishes the join so it disappears.
- Making it larger: the jeweller cuts the band and solders in a piece of matching metal, or, for a small change, stretches a plain band on a steel mandrel. Stretching thins the band, so it suits only small changes on plain rings.
- Afterwards: the ring is polished, white gold is usually re-plated, and the stones are checked.
A simple resize can take a day or two; most take about a week, and complex or posted repairs can take two weeks or more. Ask for a date before you hand the ring over, especially before a wedding or trip.
Rings that cannot be resized (or are hard to)
- Tungsten and ceramic. Very hard and brittle; they cannot be cut and soldered, so the usual answer is an exchange for a new size.
- Titanium and stainless steel. Hard to work without special equipment; many jewellers will not resize them.
- Eternity bands. Stones run all the way round, so there is no plain metal to cut, and changing the size upsets the stone spacing.
- Tension settings. The stone is held by the pressure of the band itself, and any resize can loosen it.
- Channel-set, engraved or patterned bands. Resizing can loosen stones or break the pattern, though a skilled jeweller can sometimes work around it.
- Wood, silicone and other non-metal rings. These cannot be resized.
- Plated, vermeil or gold-filled rings. The thin gold layer is damaged by cutting and heat; some jewellers will not resize them.
Sources: Blue Nile, Robinson’s Jewelers, The Knot, FTJCo.
How to make a ring smaller
There are two kinds of fix: a permanent resize by a jeweller, or an insert that takes up space inside the band. Choose by how loose the ring is and whether it can be cut.
- Check how loose it is. Measure the ring and your finger in the evening and compare them in the ring size chart in mm. Each US size is 0.81 mm across, so a ring 0.4 mm too wide is about half a size too big.
- Half a size or less: try a ring size adjuster or sizing beads first. They cost less than a resize and can be removed.
- More than half a size, or a ring you wear every day: have a jeweller size it down. It is usually the cheapest direction to resize.
- Large knuckle, slim finger: ask about a sizing bar or spring insert, which opens over the knuckle and closes at the base.
- Ring that cannot be cut (tungsten, eternity band): use a ring guard, an insert or a snug stacking ring.
Avoid glue, tape or wrapped thread inside a valuable ring: they trap moisture, can mark the metal and can loosen stones.
Ring size adjusters and other alternatives to resizing
If a ring is only slightly loose, or it cannot be resized, a ring size adjuster or one of these options can help:
| Option | What it is | Permanent? | Who fits it | Best for |
|---|---|---|---|---|
| Silicone or plastic ring size adjuster | A clear strip or spiral that fits inside the band | No, removable | You, at home | A quarter to half size; testing a smaller size |
| Sizing beads | Two small metal balls soldered inside the band | Yes, until removed by a jeweller | A jeweller (from $40 at Quick Jewelry Repairs) | Rings that spin or slip but fit over the knuckle |
| Sizing bar or spring insert | A hinged bar or spring inside the band that flexes over the knuckle | Yes | A jeweller (from $40 at Quick Jewelry Repairs) | Large knuckles with a slimmer finger base |
| Ring guard | A clip or band that wraps the shank to make it smaller | No | You, or a jeweller for metal guards | Rings that cannot be resized |
| Stacking ring | A snug band worn on the same finger to hold a looser ring in place | No | You | Eternity bands and other rings that cannot be altered |
Adjusters and guards are fine for a quarter or half size. For anything more, or for a ring you wear every day, a proper resize is safer, because a loose ring can slip off.
Ring too small?
A ring that is too tight is uncomfortable and hard to remove, especially when your hands swell in heat. Sizing up is the usual fix, and it costs more than sizing down. If you cannot get a tight ring off, soap or a little oil and a raised hand often help; if the finger is swollen, painful or changing colour, get help from a jeweller or a doctor rather than forcing it.
Check the size you need before resizing
- Measure your finger at the end of the day, when it is at its largest. Use the ring size calculator or the printable ring sizer.
- Measure a ring that fits the same finger well, and compare it in the ring size chart in mm.
- For wide bands (6 mm or more), many people need a quarter to half size larger than for a thin band.
- If you are between sizes, tell the jeweller. A half-size change is a normal request.
Many jewellers will also measure your finger with a set of metal sizers before they start. See how to measure ring size at home for all six methods, and how a ring should fit to check the size feels right.