Women’s ring size chart
Find your inside diameter (across the ring) or inside circumference (around your finger) and read across. The most common women’s sizes, US 6 to 7, are in bold.
| US / Canada | UK / Australia | ISO / EU | Japan | Diameter (mm) | Diameter (in) | Circumference (mm) | Circumference (in) |
|---|---|---|---|---|---|---|---|
| 3 | F½ | 44.2 | 4 | 14.07 | 0.554 | 44.21 | 1.74 |
| 3½ | G½ | 45.5 | 5 | 14.48 | 0.570 | 45.48 | 1.79 |
| 4 | H½ | 46.8 | 7 | 14.88 | 0.586 | 46.76 | 1.84 |
| 4½ | I½ | 48.0 | 8 | 15.29 | 0.602 | 48.04 | 1.89 |
| 5 | J½ | 49.3 | 9 | 15.70 | 0.618 | 49.31 | 1.94 |
| 5½ | K½ | 50.6 | 10 | 16.10 | 0.634 | 50.59 | 1.99 |
| 6 | L½ | 51.9 | 12 | 16.51 | 0.650 | 51.87 | 2.04 |
| 6½ | M½ | 53.1 | 13 | 16.92 | 0.666 | 53.14 | 2.09 |
| 7 | N½ | 54.4 | 14 | 17.32 | 0.682 | 54.42 | 2.14 |
| 7½ | O½ | 55.7 | 15 | 17.73 | 0.698 | 55.70 | 2.19 |
| 8 | P½ | 57.0 | 16 | 18.14 | 0.714 | 56.97 | 2.24 |
| 8½ | Q½ | 58.3 | 18 | 18.54 | 0.730 | 58.25 | 2.29 |
| 9 | R½ | 59.5 | 19 | 18.95 | 0.746 | 59.53 | 2.34 |
| 9½ | S½ | 60.8 | 20 | 19.35 | 0.762 | 60.80 | 2.39 |
| 10 | T½ | 62.1 | 21 | 19.76 | 0.778 | 62.08 | 2.44 |
For quarter sizes and sizes outside this range, use the full ring size chart. UK and Australian shops use letters; see the UK and Australian chart. For larger sizes, the men’s chart goes up to US 16 on the same scale.
How to find your size
- Measure a ring that fits. Measure the inside diameter of a ring you wear on the same finger and find it in the chart. This is the most reliable home method.
- Or measure your finger. Wrap a thin strip of paper or the printable ring sizer around the base of the finger and measure where it overlaps. That length is the circumference.
- Check the knuckle. The ring has to pass over it. If your knuckle is much wider than the base of your finger, choose a size between the two measurements.
- Measure more than once, late in the day. Fingers are larger in the evening and in warm weather, and smaller when cold.
Enter your measurement in the ring size calculator for every size at once, or see how to measure your ring size for all four methods.
Sizing an engagement ring and wedding band together
Rings worn together cover more of the finger than one ring, so a stack can feel tighter than either ring alone. StoneBridge Jewelry gives this guidance:
- Slim stacks keep the same size. An engagement ring with one narrow band, or two thin bands of about 2 mm each, usually fits in your normal size.
- Wider stacks may need more room. Pressure tends to build once the combined width passes about 6 mm, and stacks of 8 to 9 mm can feel tight in your usual size.
- Adjust the added bands, not the main ring. Keep the engagement ring true to size; a third band may suit a quarter size larger.
- Test the full width. A single narrow sizer will not show how a 7 mm stack feels. Try sizers or bands of the same total width.
Rings in the same size sit flush and look neater side by side, so ask the jeweller before changing the size of only one band.
Eternity and patterned bands
Full eternity bands, with stones all the way round, and many pavé or patterned bands cannot be resized afterwards, or only by a little. Measure carefully, check the fit late in the day, and confirm the seller’s exchange policy before ordering. See the ring resizing guide for which rings can be changed.
Other fingers and ring styles
- Each finger is a different size. Index and middle fingers are usually larger than the ring finger, and the little finger smaller. Measure the exact finger the ring will go on.
- Midi or knuckle rings sit above the knuckle, where the finger is narrower, so they need a smaller size than a ring at the base.
- Thumb rings are usually several sizes larger than a ring-finger size. Measure the thumb separately.
- Wide bands (about 6 mm or more) feel tighter than delicate bands in the same size, so many people choose a quarter to half size larger.
When your size changes
Finger size can change with temperature, exercise, weight changes and pregnancy. If your fingers are swollen or your size is changing, it is usually better to wait before buying a ring that cannot be resized. A ring that is too tight can be hard to remove; if it will not come off and the finger is painful or changing colour, ask a jeweller or doctor for help rather than forcing it.
Finding her ring size as a surprise
- Borrow a ring she wears on the ring finger of the correct hand and measure its inside diameter, then check it in the chart above.
- If you cannot take the ring away, press it into soap or modelling clay to keep its inside outline, or trace the inside edge on paper.
- Ask a close friend or family member who may know her size, or who could find out.
- If you have to guess, many jewellers suggest erring slightly larger, because a ring is usually easier to make smaller. The average ring size for women is around US 6, but many women are not that size.